Product description
Always needed at a medieval banquet! Similar tankards were used in the late Middle Ages and the renaissance. Tankards were made of wood, metal, glass or pottery.
This tankard has a content of ca. 0,5 l.
CareThis tankard has been treated with food-safe oil. It is not suitable for hot liquids. Do not keep liquids in the tankard for multiple hours, but empty the tankard as soon as possible.
Before first use, clean the tankard with a damp cloth on the inside and outside. Oil it with a neutral vegetable oil, or paraffin oil, of circa 60 degrees. Let the oil soak in for at least 10 hours, and wipe the tankard. Repeat this process twice more. Repeat the process 1x after each third use.
Rinse the tankard with lukewarm water after each use, and leave to dry at room temperature, with the opening facing downwards. Do not leave to soak in water. Store out of sunlight and heat sources.
Details:
Material: sweet cherry, oak
Diameter: ca. 11 cm
Height: ca. 14 cm
Content: ca. 0,5 l
Weight: ca. 300 g
Based on a historical original
Transport weight (gram): 1000 *
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
Washing-up instructions: Wash by hand, not suitable for dishwashing machines.
This item is produced in limited quantities only. This means that sizes may vary lightly from piece to piece, and that the item is not tested by an official authority on suitability for food preparation.
Packaged with 100% recycled material
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.
