Product description
This handmade knife blade is made of 256 layers of damascus steel. It is made of steel type AISI 4340 and 15N20 and is tempered to a hardness of 56-58 HRC.
Details:
Material: damaststeel/ 176 layers AISI 4340 and 15N20 steel
Hardness: 56-58 HRC
Edge: sharp
Length 17 cm
Blade length: 9 cm
Max. Blade width 2,8 cm
Blade thickness at the back: 3 mm
Tang: 8 cm
Transport weight (gram): 900 *
We do not sell this product to customers under the age of 18. Click here for more information on the European arms acts.
This item is produced in limited quantities only. This means that every piece is unique. Sizes & finish may vary lightly from piece to piece.
Prevent rust and corrosion by oiling your weapons regularly. Remove rust easily with black sandpaper. Remove burrs with a whetstone. Make sure you have removed all burrs before using a battle-ready weapon, as they can cause wounds.
The original method of making Damascus steel from Wootz steel was lost in the modern era. Nowadays, the name Damascus steel is used as a generic term for pattern welded / laminated or melted steel made out of two or more different steel types.
Packaged with 100% recycled material
When packaging this item, we exclusively use 100% recycled plastic and recycled paper/cardboard from FSC certified forests. We reuse a large part of the material directly without the intervention of a recycling process.
Recycle the material by separating your waste:
1. Cardboard: separate or reuse your paper.
2. Plastic cushions, clothing bags and plastic tape: separate or reuse your plastic. If possible, pierce the cushions with a volume reduction needle.
3. Paper packaging for jewelry and small items: these have a plastic inner layer. Remove these, then separate your paper and plastic.
